TestResults.Builder

공개 정적 최종 클래스 TestResults.Builder

 The output of one benchmark / test run.  Each run contains a list of
 tests or benchmarks, stored as BenchmarkEntry messages.
 This message should be emitted by the reporter (which runs the
 test / BM in a subprocess and then reads the emitted BenchmarkEntry messages;
 usually from a serialized json file, finally collecting them along
 with additional information about the test run.
Protobuf 유형 tensorflow.TestResults

공개 방법

테스트결과.빌더
addRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor 필드, 개체 값)
테스트결과
짓다 ()
테스트결과
빌드부분 ()
테스트결과.빌더
분명한 ()
테스트결과.빌더
클리어벤치마크타입 ()
.tensorflow.TestResults.BenchmarkType benchmark_type = 10;
테스트결과.빌더
클리어빌드구성 () 
 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;
테스트결과.빌더
클리어커밋ID () 
 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;
테스트결과.빌더
클리어엔트리 () 
 The list of tests or benchmarks in this run.
테스트결과.빌더
ClearField (com.google.protobuf.Descriptors.FieldDescriptor 필드)
테스트결과.빌더
ClearMachineConfiguration () 
 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;
테스트결과.빌더
클리어이름 () 
 Benchmark target identifier.
테스트결과.빌더
ClearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)
테스트결과.빌더
클리어런구성 () 
 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;
테스트결과.빌더
클리어런모드 () 
 Used for differentiating between continuous and debug builds.
테스트결과.빌더
클리어런타임 () 
 The amount of time the total run took (wall time in seconds)
double run_time = 6;
테스트결과.빌더
클리어스타트타임 () 
 The time the run started (in seconds of UTC time since Unix epoch)
int64 start_time = 5;
테스트결과.빌더
클리어타겟 () 
 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;
테스트결과.빌더
클리어Tf버전 () 
 TensorFlow version this benchmark runs against.
테스트결과.빌더
클론 ()
TestResults.BenchmarkType
getBenchmarkType ()
.tensorflow.TestResults.BenchmarkType benchmark_type = 10;
정수
getBenchmarkTypeValue ()
.tensorflow.TestResults.BenchmarkType benchmark_type = 10;
빌드 구성
getBuildConfiguration () 
 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;
BuildConfiguration.Builder
getBuildConfigurationBuilder () 
 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;
BuildConfigurationOrBuilder
getBuildConfigurationOrBuilder () 
 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;
커밋 ID
getCommitId () 
 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;
커밋Id.Builder
getCommitIdBuilder () 
 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;
커밋IdOrBuilder
getCommitIdOrBuilder () 
 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;
테스트결과
getDefaultInstanceForType ()
최종 정적 com.google.protobuf.Descriptors.Descriptor
getDescriptor ()
com.google.protobuf.Descriptors.Descriptor
getDescriptorForType ()
벤치마크 항목
getEntry () 
 The list of tests or benchmarks in this run.
BenchmarkEntries.Builder
getEntriesBuilder () 
 The list of tests or benchmarks in this run.
벤치마크항목또는 빌더
getEntriesOrBuilder () 
 The list of tests or benchmarks in this run.
기계 구성
getMachineConfiguration () 
 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;
MachineConfiguration.Builder
getMachineConfigurationBuilder () 
 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;
MachineConfigurationOrBuilder
getMachineConfigurationOrBuilder () 
 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;
끈
getName () 
 Benchmark target identifier.
com.google.protobuf.ByteString
getNameBytes () 
 Benchmark target identifier.
실행구성
getRun구성 () 
 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;
RunConfiguration.Builder
getRunConfigurationBuilder () 
 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;
RunConfigurationOrBuilder
getRunConfigurationOrBuilder () 
 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;
끈
getRunMode () 
 Used for differentiating between continuous and debug builds.
com.google.protobuf.ByteString
getRunModeBytes () 
 Used for differentiating between continuous and debug builds.
더블
getRunTime () 
 The amount of time the total run took (wall time in seconds)
double run_time = 6;
긴
getStartTime () 
 The time the run started (in seconds of UTC time since Unix epoch)
int64 start_time = 5;
끈
getTarget () 
 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;
com.google.protobuf.ByteString
getTargetBytes () 
 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;
끈
getTf버전 () 
 TensorFlow version this benchmark runs against.
com.google.protobuf.ByteString
getTfVersionBytes () 
 TensorFlow version this benchmark runs against.
부울
hasBuildConfiguration () 
 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;
부울
hasCommitId () 
 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;
부울
hasEntries () 
 The list of tests or benchmarks in this run.
부울
hasMachineConfiguration () 
 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;
부울
hasRun구성 () 
 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;
최종 부울
초기화됨 ()
테스트결과.빌더
mergeBuildConfiguration ( BuildConfiguration 값) 
 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;
테스트결과.빌더
mergeCommitId ( CommitId 값) 
 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;
테스트결과.빌더
mergeEntries ( BenchmarkEntries 값) 
 The list of tests or benchmarks in this run.
테스트결과.빌더
mergeFrom (com.google.protobuf.다른 메시지 보내기)
테스트결과.빌더
mergeFrom (com.google.protobuf.CodedInputStream 입력, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
테스트결과.빌더
mergeMachineConfiguration ( MachineConfiguration 값) 
 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;
테스트결과.빌더
mergeRunConfiguration ( RunConfiguration 값) 
 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;
최종 TestResults.Builder
mergeUnknownFields (com.google.protobuf.UnknownFieldSet 알려지지 않은Fields)
테스트결과.빌더
setBenchmarkType ( TestResults.BenchmarkType 값)
.tensorflow.TestResults.BenchmarkType benchmark_type = 10;
테스트결과.빌더
setBenchmarkTypeValue (정수 값)
.tensorflow.TestResults.BenchmarkType benchmark_type = 10;
테스트결과.빌더
setBuildConfiguration ( BuildConfiguration.Builder builderForValue) 
 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;
테스트결과.빌더
setBuildConfiguration ( BuildConfiguration 값) 
 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;
테스트결과.빌더
setCommitId ( CommitId.Builder builderForValue) 
 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;
테스트결과.빌더
setCommitId ( CommitId 값) 
 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;
테스트결과.빌더
setEntries ( BenchmarkEntries.Builder builderForValue) 
 The list of tests or benchmarks in this run.
테스트결과.빌더
setEntries ( BenchmarkEntries 값) 
 The list of tests or benchmarks in this run.
테스트결과.빌더
setField (com.google.protobuf.Descriptors.FieldDescriptor 필드, 개체 값)
테스트결과.빌더
setMachineConfiguration ( MachineConfiguration.Builder builderForValue) 
 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;
테스트결과.빌더
setMachineConfiguration ( MachineConfiguration 값) 
 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;
테스트결과.빌더
setName (문자열 값) 
 Benchmark target identifier.
테스트결과.빌더
setNameBytes (com.google.protobuf.ByteString 값) 
 Benchmark target identifier.
테스트결과.빌더
setRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor 필드, int 인덱스, 개체 값)
테스트결과.빌더
setRunConfiguration ( RunConfiguration 값) 
 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;
테스트결과.빌더
setRunConfiguration ( RunConfiguration.Builder builderForValue) 
 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;
테스트결과.빌더
setRunMode (문자열 값) 
 Used for differentiating between continuous and debug builds.
테스트결과.빌더
setRunModeBytes (com.google.protobuf.ByteString 값) 
 Used for differentiating between continuous and debug builds.
테스트결과.빌더
setRunTime (이중 값) 
 The amount of time the total run took (wall time in seconds)
double run_time = 6;
테스트결과.빌더
setStartTime (긴 값) 
 The time the run started (in seconds of UTC time since Unix epoch)
int64 start_time = 5;
테스트결과.빌더
setTarget (문자열 값) 
 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;
테스트결과.빌더
setTargetBytes (com.google.protobuf.ByteString 값) 
 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;
테스트결과.빌더
setTfVersion (문자열 값) 
 TensorFlow version this benchmark runs against.
테스트결과.빌더
setTfVersionBytes (com.google.protobuf.ByteString 값) 
 TensorFlow version this benchmark runs against.
최종 TestResults.Builder
setUnknownFields (com.google.protobuf.UnknownFieldSet UnknownFields)

상속된 메서드

공개 방법

공개 TestResults.Builder addRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor 필드, 개체 값)

공개 TestResults 빌드 ()

공개 TestResults buildPartial ()

공개 TestResults.Builder 지우기 ()

공개 TestResults.Builder ClearBenchmarkType ()

.tensorflow.TestResults.BenchmarkType benchmark_type = 10;

공개 TestResults.Builder ClearBuildConfiguration () 

 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;

공개 TestResults.Builder ClearCommitId () 

 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;

공개 TestResults.Builder ClearEntries () 

 The list of tests or benchmarks in this run.
.tensorflow.BenchmarkEntries entries = 2;

공개 TestResults.BuilderclearField ( com.google.protobuf.Descriptors.FieldDescriptor 필드)

공개 TestResults.Builder ClearMachineConfiguration () 

 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;

공개 TestResults.Builder 클리어이름 () 

 Benchmark target identifier.
string name = 9;

공개 TestResults.BuilderclearOneof ( com.google.protobuf.Descriptors.OneofDescriptor oneof)

공개 TestResults.Builder ClearRunConfiguration () 

 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;

공개 TestResults.Builder 클리어런모드 () 

 Used for differentiating between continuous and debug builds.
 Must be one of:
 * cbuild: results from continuous build.
 * presubmit: results from oneshot requests.
 * culprit: results from culprit finder rerun.
string run_mode = 11;

공개 TestResults.Builder 클리어런타임 () 

 The amount of time the total run took (wall time in seconds)
double run_time = 6;

공개 TestResults.Builder ClearStartTime () 

 The time the run started (in seconds of UTC time since Unix epoch)
int64 start_time = 5;

공개 TestResults.Builder ClearTarget () 

 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;

공개 TestResults.Builder 클리어TfVersion () 

 TensorFlow version this benchmark runs against.
 This can be either set to full version or just the major version.
string tf_version = 12;

공개 TestResults.Builder 클론 ()

공개 TestResults.BenchmarkType getBenchmarkType ()

.tensorflow.TestResults.BenchmarkType benchmark_type = 10;

공개 int getBenchmarkTypeValue ()

.tensorflow.TestResults.BenchmarkType benchmark_type = 10;

공개 BuildConfiguration getBuildConfiguration () 

 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;

공개 BuildConfiguration.Builder getBuildConfigurationBuilder () 

 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;

공개 BuildConfigurationOrBuilder getBuildConfigurationOrBuilder () 

 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;

공개 CommitId getCommitId () 

 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;

공개 CommitId.Builder getCommitIdBuilder () 

 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;

공개 CommitIdOrBuilder getCommitIdOrBuilder () 

 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;

공개 테스트 결과 getDefaultInstanceForType ()

공개 정적 최종 com.google.protobuf.Descriptors.Descriptor getDescriptor ()

공개 com.google.protobuf.Descriptors.Descriptor getDescriptorForType ()

공개 BenchmarkEntries getEntries () 

 The list of tests or benchmarks in this run.
.tensorflow.BenchmarkEntries entries = 2;

공개 BenchmarkEntries.Builder getEntriesBuilder () 

 The list of tests or benchmarks in this run.
.tensorflow.BenchmarkEntries entries = 2;

공개 BenchmarkEntriesOrBuilder getEntriesOrBuilder () 

 The list of tests or benchmarks in this run.
.tensorflow.BenchmarkEntries entries = 2;

공개 MachineConfiguration getMachineConfiguration () 

 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;

공개 MachineConfiguration.Builder getMachineConfigurationBuilder () 

 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;

공개 MachineConfigurationOrBuilder getMachineConfigurationOrBuilder () 

 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;

공개 문자열 getName () 

 Benchmark target identifier.
string name = 9;

공개 com.google.protobuf.ByteString getNameBytes () 

 Benchmark target identifier.
string name = 9;

공개 RunConfiguration getRunConfiguration () 

 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;

공개 RunConfiguration.Builder getRunConfigurationBuilder () 

 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;

공개 RunConfigurationOrBuilder getRunConfigurationOrBuilder () 

 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;

공개 문자열 getRunMode () 

 Used for differentiating between continuous and debug builds.
 Must be one of:
 * cbuild: results from continuous build.
 * presubmit: results from oneshot requests.
 * culprit: results from culprit finder rerun.
string run_mode = 11;

공개 com.google.protobuf.ByteString getRunModeBytes () 

 Used for differentiating between continuous and debug builds.
 Must be one of:
 * cbuild: results from continuous build.
 * presubmit: results from oneshot requests.
 * culprit: results from culprit finder rerun.
string run_mode = 11;

공개 이중 getRunTime () 

 The amount of time the total run took (wall time in seconds)
double run_time = 6;

공개 긴 getStartTime () 

 The time the run started (in seconds of UTC time since Unix epoch)
int64 start_time = 5;

공개 문자열 getTarget () 

 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;

공개 com.google.protobuf.ByteString getTargetBytes () 

 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;

공개 문자열 getTfVersion () 

 TensorFlow version this benchmark runs against.
 This can be either set to full version or just the major version.
string tf_version = 12;

공개 com.google.protobuf.ByteString getTfVersionBytes () 

 TensorFlow version this benchmark runs against.
 This can be either set to full version or just the major version.
string tf_version = 12;

공개 부울 hasBuildConfiguration () 

 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;

공개 부울 hasCommitId () 

 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;

공개 부울 hasEntries () 

 The list of tests or benchmarks in this run.
.tensorflow.BenchmarkEntries entries = 2;

공개 부울 hasMachineConfiguration () 

 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;

공개 부울 hasRunConfiguration () 

 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;

공개 최종 부울 isInitialized ()

공개 TestResults.Builder mergeBuildConfiguration ( BuildConfiguration 값) 

 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;

공개 TestResults.Builder mergeCommitId ( CommitId 값) 

 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;

공개 TestResults.Builder mergeEntries ( BenchmarkEntries 값) 

 The list of tests or benchmarks in this run.
.tensorflow.BenchmarkEntries entries = 2;

공개 TestResults.Builder mergeFrom (com.google.protobuf.다른 메시지)

공개 TestResults.Builder mergeFrom (com.google.protobuf.CodedInputStream 입력, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)

던지기
IO예외

공개 TestResults.Builder mergeMachineConfiguration ( MachineConfiguration 값) 

 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;

공개 TestResults.Builder mergeRunConfiguration ( RunConfiguration 값) 

 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;

공개 최종 TestResults.Builder mergeUnknownFields (com.google.protobuf.UnknownFieldSet UnknownFields)

공개 TestResults.Builder setBenchmarkType ( TestResults.BenchmarkType 값)

.tensorflow.TestResults.BenchmarkType benchmark_type = 10;

공개 TestResults.Builder setBenchmarkTypeValue (int 값)

.tensorflow.TestResults.BenchmarkType benchmark_type = 10;

공개 TestResults.Builder setBuildConfiguration ( BuildConfiguration.Builder builderForValue) 

 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;

공개 TestResults.Builder setBuildConfiguration ( BuildConfiguration 값) 

 The configuration of the build (compiled opt? with cuda? any copts?)
.tensorflow.BuildConfiguration build_configuration = 3;

공개 TestResults.Builder setCommitId ( CommitId.Builder builderForValue) 

 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;

공개 TestResults.Builder setCommitId ( CommitId 값) 

 The commit id (git hash or changelist)
.tensorflow.CommitId commit_id = 4;

공개 TestResults.Builder setEntries ( BenchmarkEntries.Builder builderForValue) 

 The list of tests or benchmarks in this run.
.tensorflow.BenchmarkEntries entries = 2;

공개 TestResults.Builder setEntries ( BenchmarkEntries 값) 

 The list of tests or benchmarks in this run.
.tensorflow.BenchmarkEntries entries = 2;

공개 TestResults.Builder setField (com.google.protobuf.Descriptors.FieldDescriptor 필드, 개체 값)

공개 TestResults.Builder setMachineConfiguration ( MachineConfiguration.Builder builderForValue) 

 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;

공개 TestResults.Builder setMachineConfiguration ( MachineConfiguration 값) 

 Machine-specific parameters (Platform and CPU info)
.tensorflow.MachineConfiguration machine_configuration = 7;

공개 TestResults.Builder setName (문자열 값) 

 Benchmark target identifier.
string name = 9;

공개 TestResults.Builder setNameBytes (com.google.protobuf.ByteString 값) 

 Benchmark target identifier.
string name = 9;

공개 TestResults.Builder setRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor 필드, int 인덱스, 개체 값)

공개 TestResults.Builder setRunConfiguration ( RunConfiguration 값) 

 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;

공개 TestResults.Builder setRunConfiguration ( RunConfiguration.Builder builderForValue) 

 Run-specific parameters (arguments, etc)
.tensorflow.RunConfiguration run_configuration = 8;

공개 TestResults.Builder setRunMode (문자열 값) 

 Used for differentiating between continuous and debug builds.
 Must be one of:
 * cbuild: results from continuous build.
 * presubmit: results from oneshot requests.
 * culprit: results from culprit finder rerun.
string run_mode = 11;

공개 TestResults.Builder setRunModeBytes (com.google.protobuf.ByteString 값) 

 Used for differentiating between continuous and debug builds.
 Must be one of:
 * cbuild: results from continuous build.
 * presubmit: results from oneshot requests.
 * culprit: results from culprit finder rerun.
string run_mode = 11;

공개 TestResults.Builder setRunTime (이중 값) 

 The amount of time the total run took (wall time in seconds)
double run_time = 6;

공개 TestResults.Builder setStartTime (긴 값) 

 The time the run started (in seconds of UTC time since Unix epoch)
int64 start_time = 5;

공개 TestResults.Builder setTarget (문자열 값) 

 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;

공개 TestResults.Builder setTargetBytes (com.google.protobuf.ByteString 값) 

 The target of the run, e.g.:
  //tensorflow/core:kernels_adjust_contrast_op_benchmark_test
string target = 1;

공개 TestResults.Builder setTfVersion (문자열 값) 

 TensorFlow version this benchmark runs against.
 This can be either set to full version or just the major version.
string tf_version = 12;

공개 TestResults.Builder setTfVersionBytes (com.google.protobuf.ByteString 값) 

 TensorFlow version this benchmark runs against.
 This can be either set to full version or just the major version.
string tf_version = 12;

공개 최종 TestResults.Builder setUnknownFields (com.google.protobuf.UnknownFieldSetknownFields)