RunMetadata.Builder

الفئة النهائية العامة الثابتة RunMetadata.Builder

 Metadata output (i.e., non-Tensor) for a single Run() call.
 
نوع Protobuf tensorflow.RunMetadata

الأساليب العامة

RunMetadata.Builder
addAllFunctionGraphs (Iterable<? يمتد RunMetadata.FunctionGraphs > القيم)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
addAllPartitionGraphs (Iterable<؟ يمتد GraphDef > القيم)
 Graphs of the partitions executed by executors.
RunMetadata.Builder
addFunctionGraphs (مؤشر int، قيمة RunMetadata.FunctionGraphs )
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
addFunctionGraphs (مؤشر int، RunMetadata.FunctionGraphs.Builder builderForValue)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
addFunctionGraphs (قيمة RunMetadata.FunctionGraphs )
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
addFunctionGraphs ( RunMetadata.FunctionGraphs.Builder builderForValue)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.FunctionGraphs.Builder
addFunctionGraphsBuilder (فهرس كثافة العمليات)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.FunctionGraphs.Builder
addFunctionGraphsBuilder ()
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
addPartitionGraphs (مؤشر int، قيمة GraphDef )
 Graphs of the partitions executed by executors.
RunMetadata.Builder
addPartitionGraphs ( GraphDef.Builder builderForValue)
 Graphs of the partitions executed by executors.
RunMetadata.Builder
addPartitionGraphs (قيمة GraphDef )
 Graphs of the partitions executed by executors.
RunMetadata.Builder
addPartitionGraphs (مؤشر int، GraphDef.Builder builderForValue)
 Graphs of the partitions executed by executors.
GraphDef.Builder
addPartitionGraphsBuilder (فهرس كثافة العمليات)
 Graphs of the partitions executed by executors.
GraphDef.Builder
addPartitionGraphsBuilder ()
 Graphs of the partitions executed by executors.
RunMetadata.Builder
addRepeatedField (حقل com.google.protobuf.Descriptors.FieldDescriptor، قيمة الكائن)
RunMetadata
RunMetadata
RunMetadata.Builder
RunMetadata.Builder
كليركوستغراف ()
 The cost graph for the computation defined by the run call.
RunMetadata.Builder
ClearField (حقل com.google.protobuf.Descriptors.FieldDescriptor)
RunMetadata.Builder
ClearFunctionGraphs ()
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
ClearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)
RunMetadata.Builder
مسح الرسوم البيانية ()
 Graphs of the partitions executed by executors.
RunMetadata.Builder
كليرستيبستاتس ()
 Statistics traced for this step.
RunMetadata.Builder
CostGraphDef
الحصول على التكلفةالرسم البياني ()
 The cost graph for the computation defined by the run call.
CostGraphDef.Builder
getCostGraphBuilder ()
 The cost graph for the computation defined by the run call.
CostGraphDefOrBuilder
getCostGraphOrBuilder ()
 The cost graph for the computation defined by the run call.
RunMetadata
النهائي الثابت com.google.protobuf.Descriptors.Descriptor
com.google.protobuf.Descriptors.Descriptor
RunMetadata.FunctionGraphs
getFunctionGraphs (فهرس كثافة العمليات)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.FunctionGraphs.Builder
getFunctionGraphsBuilder (فهرس كثافة العمليات)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
القائمة< RunMetadata.FunctionGraphs.Builder >
getFunctionGraphsBuilderList ()
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
كثافة العمليات
getFunctionGraphsCount ()
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
القائمة< RunMetadata.FunctionGraphs >
قائمة getFunctionGraphs ()
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.FunctionGraphsOrBuilder
getFunctionGraphsOrBuilder (فهرس كثافة العمليات)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
القائمة<؟ يمتد RunMetadata.FunctionGraphsOrBuilder >
getFunctionGraphsOrBuilderList ()
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
GraphDef
getPartitionGraphs (فهرس كثافة العمليات)
 Graphs of the partitions executed by executors.
GraphDef.Builder
getPartitionGraphsBuilder (فهرس كثافة العمليات)
 Graphs of the partitions executed by executors.
القائمة< GraphDef.Builder >
getPartitionGraphsBuilderList ()
 Graphs of the partitions executed by executors.
كثافة العمليات
الحصول علىPartitionGraphsCount ()
 Graphs of the partitions executed by executors.
القائمة< GraphDef >
قائمة getPartitionGraphs ()
 Graphs of the partitions executed by executors.
GraphDefOrBuilder
getPartitionGraphsOrBuilder (فهرس كثافة العمليات)
 Graphs of the partitions executed by executors.
القائمة<؟ يمتد GraphDefOrBuilder >
getPartitionGraphsOrBuilderList ()
 Graphs of the partitions executed by executors.
ستيبستاتس
الحصول على ستيبستاتس ()
 Statistics traced for this step.
StepStats.Builder
getStepStatsBuilder ()
 Statistics traced for this step.
StepStatsOrBuilder
getStepStatsOrBuilder ()
 Statistics traced for this step.
منطقية
hasCostGraph ()
 The cost graph for the computation defined by the run call.
منطقية
هاستيبستاتس ()
 Statistics traced for this step.
منطقية نهائية
RunMetadata.Builder
mergeCostGraph (قيمة CostGraphDef )
 The cost graph for the computation defined by the run call.
RunMetadata.Builder
دمج من (com.google.protobuf.Message أخرى)
RunMetadata.Builder
دمج من (com.google.protobuf.CodedInputStream input، com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
RunMetadata.Builder
mergeStepStats (قيمة StepStats )
 Statistics traced for this step.
RunMetadata.Builder النهائي
دمجUnknownFields (com.google.protobuf.UnknownFieldSet UnknownFields)
RunMetadata.Builder
إزالةFunctionGraphs (فهرس كثافة العمليات)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
إزالة PartitionGraphs (فهرس كثافة العمليات)
 Graphs of the partitions executed by executors.
RunMetadata.Builder
setCostGraph (قيمة CostGraphDef )
 The cost graph for the computation defined by the run call.
RunMetadata.Builder
setCostGraph ( CostGraphDef.Builder builderForValue)
 The cost graph for the computation defined by the run call.
RunMetadata.Builder
setField (حقل com.google.protobuf.Descriptors.FieldDescriptor، قيمة الكائن)
RunMetadata.Builder
setFunctionGraphs (مؤشر int، قيمة RunMetadata.FunctionGraphs )
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
setFunctionGraphs (مؤشر int، RunMetadata.FunctionGraphs.Builder builderForValue)
 This is only populated for graphs that are run as functions in TensorFlow
 V2.
RunMetadata.Builder
setPartitionGraphs (مؤشر int، GraphDef.Builder builderForValue)
 Graphs of the partitions executed by executors.
RunMetadata.Builder
setPartitionGraphs (مؤشر int، قيمة GraphDef )
 Graphs of the partitions executed by executors.
RunMetadata.Builder
setRepeatedField (حقل com.google.protobuf.Descriptors.FieldDescriptor، فهرس int، قيمة الكائن)
RunMetadata.Builder
setStepStats ( StepStats.Builder builderForValue)
 Statistics traced for this step.
RunMetadata.Builder
setStepStats (قيمة StepStats )
 Statistics traced for this step.
RunMetadata.Builder النهائي
setUnknownFields (com.google.protobuf.UnknownFieldSet UnknownFields)

الطرق الموروثة

الأساليب العامة

RunMetadata.Builder العام addAllFunctionGraphs (Iterable<? يمتد RunMetadata.FunctionGraphs > القيم)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder العام addAllPartitionGraphs (Iterable <؟ يمتد GraphDef > القيم)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder addFunctionGraphs العام (مؤشر int، قيمة RunMetadata.FunctionGraphs )

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder public addFunctionGraphs (مؤشر int، RunMetadata.FunctionGraphs.Builder builderForValue)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder العامة addFunctionGraphs (قيمة RunMetadata.FunctionGraphs )

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder العامة addFunctionGraphs ( RunMetadata.FunctionGraphs.Builder builderForValue)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.FunctionGraphs.Builder العام addFunctionGraphsBuilder (فهرس كثافة العمليات)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.FunctionGraphs.Builder العامة addFunctionGraphsBuilder ()

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder العامة addPartitionGraphs (مؤشر int، قيمة GraphDef )

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder addPartitionGraphs العام ( GraphDef.Builder builderForValue)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder العامة addPartitionGraphs (قيمة GraphDef )

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder public addPartitionGraphs (مؤشر int، GraphDef.Builder builderForValue)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

GraphDef.Builder العام addPartitionGraphsBuilder (مؤشر int)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

GraphDef.Builder العام addPartitionGraphsBuilder ()

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder العام addRepeatedField (حقل com.google.protobuf.Descriptors.FieldDescriptor، قيمة الكائن)

بناء RunMetadata العام ()

بناء RunMetadata العام جزئيًا ()

RunMetadata.Builder العام واضح ()

RunMetadata.Builder العام ClearCostGraph ()

 The cost graph for the computation defined by the run call.
 
.tensorflow.CostGraphDef cost_graph = 2;

RunMetadata.Builder ClearField العام (حقل com.google.protobuf.Descriptors.FieldDescriptor)

RunMetadata.Builder العام ClearFunctionGraphs ()

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder العام ClearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)

RunMetadata.Builder العام ClearPartitionGraphs ()

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder العام ClearStepStats ()

 Statistics traced for this step. Populated if tracing is turned on via the
 "RunOptions" proto.
 EXPERIMENTAL: The format and set of events may change in future versions.
 
.tensorflow.StepStats step_stats = 1;

استنساخ RunMetadata.Builder العام ()

getCostGraph العامة CostGraphDef ()

 The cost graph for the computation defined by the run call.
 
.tensorflow.CostGraphDef cost_graph = 2;

CostGraphDef.Builder العامة getCostGraphBuilder ()

 The cost graph for the computation defined by the run call.
 
.tensorflow.CostGraphDef cost_graph = 2;

getCostGraphDefOrBuilder العامة getCostGraphOrBuilder ()

 The cost graph for the computation defined by the run call.
 
.tensorflow.CostGraphDef cost_graph = 2;

GetDefaultInstanceForType () RunMetadata العامة

النهائي العام الثابت com.google.protobuf.Descriptors.Descriptor getDescriptor ()

com.google.protobuf.Descriptors.Descriptor getDescriptorForType () العام

RunMetadata.FunctionGraphs العام getFunctionGraphs (مؤشر int)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.FunctionGraphs.Builder العام getFunctionGraphsBuilder (فهرس كثافة العمليات)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

القائمة العامة< RunMetadata.FunctionGraphs.Builder > getFunctionGraphsBuilderList ()

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

int public getFunctionGraphsCount ()

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

القائمة العامة< RunMetadata.FunctionGraphs > getFunctionGraphsList ()

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.FunctionGraphsOrBuilder العام getFunctionGraphsOrBuilder (فهرس كثافة العمليات)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

القائمة العامة <؟ يمتد RunMetadata.FunctionGraphsOrBuilder > getFunctionGraphsOrBuilderList ()

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

GraphDef getPartitionGraphs العام (مؤشر int)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

GraphDef.Builder العام getPartitionGraphsBuilder (مؤشر int)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

القائمة العامة< GraphDef.Builder > getPartitionGraphsBuilderList ()

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

int public getPartitionGraphsCount ()

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

القائمة العامة< GraphDef > getPartitionGraphsList ()

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

GraphDefOrBuilder العام getPartitionGraphsOrBuilder (مؤشر int)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

القائمة العامة <؟ يمتد GraphDefOrBuilder > getPartitionGraphsOrBuilderList ()

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

StepStats العامة getStepStats ()

 Statistics traced for this step. Populated if tracing is turned on via the
 "RunOptions" proto.
 EXPERIMENTAL: The format and set of events may change in future versions.
 
.tensorflow.StepStats step_stats = 1;

StepStats.Builder العامة getStepStatsBuilder ()

 Statistics traced for this step. Populated if tracing is turned on via the
 "RunOptions" proto.
 EXPERIMENTAL: The format and set of events may change in future versions.
 
.tensorflow.StepStats step_stats = 1;

GetStepStatsOrBuilder العامة getStepStatsOrBuilder ()

 Statistics traced for this step. Populated if tracing is turned on via the
 "RunOptions" proto.
 EXPERIMENTAL: The format and set of events may change in future versions.
 
.tensorflow.StepStats step_stats = 1;

hasCostGraph () المنطقي العام

 The cost graph for the computation defined by the run call.
 
.tensorflow.CostGraphDef cost_graph = 2;

hasStepStats المنطقية العامة ()

 Statistics traced for this step. Populated if tracing is turned on via the
 "RunOptions" proto.
 EXPERIMENTAL: The format and set of events may change in future versions.
 
.tensorflow.StepStats step_stats = 1;

تمت تهيئة القيمة المنطقية النهائية العامة ()

RunMetadata.Builder العام mergeCostGraph (قيمة CostGraphDef )

 The cost graph for the computation defined by the run call.
 
.tensorflow.CostGraphDef cost_graph = 2;

RunMetadata.Builder العام mergeFrom (com.google.protobuf.Message أخرى)

RunMetadata.Builder العام mergeFrom (com.google.protobuf.CodedInputStream input, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)

رميات
IOEException

RunMetadata.Builder العام mergeStepStats (قيمة StepStats )

 Statistics traced for this step. Populated if tracing is turned on via the
 "RunOptions" proto.
 EXPERIMENTAL: The format and set of events may change in future versions.
 
.tensorflow.StepStats step_stats = 1;

RunMetadata.Builder النهائي العام mergeUnknownFields (com.google.protobuf.UnknownFieldSetUnknownFields)

RunMetadata.Builder العام RemoveFunctionGraphs (مؤشر int)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder العام RemovePartitionGraphs (مؤشر int)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder العامة setCostGraph (قيمة CostGraphDef )

 The cost graph for the computation defined by the run call.
 
.tensorflow.CostGraphDef cost_graph = 2;

RunMetadata.Builder العام setCostGraph ( CostGraphDef.Builder builderForValue)

 The cost graph for the computation defined by the run call.
 
.tensorflow.CostGraphDef cost_graph = 2;

RunMetadata.Builder setField العام (حقل com.google.protobuf.Descriptors.FieldDescriptor، قيمة الكائن)

RunMetadata.Builder العامة setFunctionGraphs (مؤشر int، قيمة RunMetadata.FunctionGraphs )

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder العام setFunctionGraphs (مؤشر int، RunMetadata.FunctionGraphs.Builder builderForValue)

 This is only populated for graphs that are run as functions in TensorFlow
 V2. There will be an entry below for each function that is traced.
 The main use cases of the post_optimization_graph and the partition_graphs
 is to give the caller insight into the graphs that were actually run by the
 runtime. Additional information (such as those in step_stats) will match
 these graphs.
 We also include the pre_optimization_graph since it is usually easier to
 read, and is helpful in situations where the caller wants to get a high
 level idea of what the built graph looks like (since the various graph
 optimization passes might change the structure of the graph significantly).
 
repeated .tensorflow.RunMetadata.FunctionGraphs function_graphs = 4;

RunMetadata.Builder العام setPartitionGraphs (مؤشر int، GraphDef.Builder builderForValue)

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder العامة setPartitionGraphs (مؤشر int، قيمة GraphDef )

 Graphs of the partitions executed by executors.
 
repeated .tensorflow.GraphDef partition_graphs = 3;

RunMetadata.Builder العام setRepeatedField (حقل com.google.protobuf.Descriptors.FieldDescriptor، مؤشر int، قيمة الكائن)

RunMetadata.Builder العام setStepStats ( StepStats.Builder builderForValue)

 Statistics traced for this step. Populated if tracing is turned on via the
 "RunOptions" proto.
 EXPERIMENTAL: The format and set of events may change in future versions.
 
.tensorflow.StepStats step_stats = 1;

RunMetadata.Builder العامة setStepStats (قيمة StepStats )

 Statistics traced for this step. Populated if tracing is turned on via the
 "RunOptions" proto.
 EXPERIMENTAL: The format and set of events may change in future versions.
 
.tensorflow.StepStats step_stats = 1;

النهائي العام RunMetadata.Builder setUnknownFields (com.google.protobuf.UnknownFieldSetUnknownFields)