NodeDef

공개 최종 클래스 NodeDef

Protobuf 유형 tensorflow.NodeDef

중첩 클래스

수업 NodeDef.Builder Protobuf 유형 tensorflow.NodeDef
수업 NodeDef.ExperimentalDebugInfo Protobuf 유형 tensorflow.NodeDef.ExperimentalDebugInfo
인터페이스 NodeDef.ExperimentalDebugInfoOrBuilder

상수

정수 ATTR_FIELD_NUMBER
정수 DEVICE_FIELD_NUMBER
정수 EXPERIMENTAL_DEBUG_INFO_FIELD_NUMBER
정수 INPUT_FIELD_NUMBER
정수 NAME_FIELD_NUMBER
정수 OP_FIELD_NUMBER

공개 방법

부울
containAttr (문자열 키) 
 Operation-specific graph-construction-time configuration.
부울
같음 (객체 객체)
Map<문자열, 속성값 >
getAttr ()
대신 getAttrMap() 사용하세요.
정수
getAttrCount () 
 Operation-specific graph-construction-time configuration.
Map<문자열, 속성값 >
getAttrMap () 
 Operation-specific graph-construction-time configuration.
속성값
getAttrOrDefault (문자열 키, AttrValue defaultValue) 
 Operation-specific graph-construction-time configuration.
속성값
getAttrOrThrow (문자열 키) 
 Operation-specific graph-construction-time configuration.
정적 NodeDef
getDefaultInstance ()
NodeDef
getDefaultInstanceForType ()
최종 정적 com.google.protobuf.Descriptors.Descriptor
getDescriptor ()
끈
getDevice () 
 A (possibly partial) specification for the device on which this
 node should be placed.
com.google.protobuf.ByteString
getDeviceBytes () 
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.ExperimentalDebugInfo
getExperimentalDebugInfo () 
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfoOrBuilder
getExperimentalDebugInfoOrBuilder () 
 This stores debug information associated with the node.
끈
getInput (정수 인덱스) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ByteString
getInputBytes (정수 인덱스) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
정수
getInputCount () 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ProtocolStringList
getInputList () 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
끈
getName () 
 The name given to this operator.
com.google.protobuf.ByteString
getNameBytes () 
 The name given to this operator.
끈
getOp () 
 The operation name.
com.google.protobuf.ByteString
getOpBytes () 
 The operation name.
getParserForType ()
정수
getSerializedSize ()
최종 com.google.protobuf.UnknownFieldSet
getUnknownFields ()
부울
hasExperimentalDebugInfo () 
 This stores debug information associated with the node.
정수
해시코드 ()
최종 부울
초기화됨 ()
정적 NodeDef.Builder
newBuilder ( NodeDef 프로토타입)
정적 NodeDef.Builder
새로운 빌더 ()
NodeDef.Builder
newBuilderForType ()
정적 NodeDef
parsDelimitedFrom (InputStream 입력)
정적 NodeDef
parseDelimitedFrom (InputStream 입력, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
정적 NodeDef
parsFrom (ByteBuffer 데이터)
정적 NodeDef
ParseFrom (com.google.protobuf.CodedInputStream 입력, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
정적 NodeDef
ParseFrom (ByteBuffer 데이터, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
정적 NodeDef
ParseFrom (com.google.protobuf.CodedInputStream 입력)
정적 NodeDef
parseFrom (byte[] 데이터, com.google.protobuf.ExtensionRegistryLite 확장Registry)
정적 NodeDef
ParseFrom (com.google.protobuf.ByteString 데이터)
정적 NodeDef
ParseFrom (InputStream 입력, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
정적 NodeDef
ParseFrom (com.google.protobuf.ByteString 데이터, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
공전
파서 ()
NodeDef.Builder
toBuilder ()
무효의
writeTo (com.google.protobuf.CodedOutputStream 출력)

상속된 메서드

상수

공개 정적 최종 int ATTR_FIELD_NUMBER

상수값: 5

공개 정적 최종 int DEVICE_FIELD_NUMBER

상수값: 4

공개 정적 최종 int EXPERIMENTAL_DEBUG_INFO_FIELD_NUMBER

상수값: 6

공개 정적 최종 int INPUT_FIELD_NUMBER

상수값: 3

공개 정적 최종 정수 NAME_FIELD_NUMBER

상수값: 1

공개 정적 최종 정수 OP_FIELD_NUMBER

상수값: 2

공개 방법

공개 부울 containAttr (문자열 키) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

공개 부울은 (객체 obj) 와 같습니다 .

공개 Map<String, AttrValue > getAttr ()

대신 getAttrMap() 사용하세요.

공개 int getAttrCount () 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

공용 Map<String, AttrValue > getAttrMap () 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public AttrValue getAttrOrDefault (문자열 키, AttrValue defaultValue) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

공개 AttrValue getAttrOrThrow (문자열 키) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

공개 정적 NodeDef getDefaultInstance ()

공개 NodeDef getDefaultInstanceForType ()

공개 정적 최종 com.google.protobuf.Descriptors.Descriptor getDescriptor ()

공개 문자열 getDevice () 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

공개 com.google.protobuf.ByteString getDeviceBytes () 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

공개 NodeDef.ExperimentalDebugInfo getExperimentalDebugInfo () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

공개 NodeDef.ExperimentalDebugInfoOrBuilder getExperimentalDebugInfoOrBuilder () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

공개 문자열 getInput (int 인덱스) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

공개 com.google.protobuf.ByteString getInputBytes (int 인덱스) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

공개 int getInputCount () 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

공개 com.google.protobuf.ProtocolStringList getInputList () 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

공개 문자열 getName () 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

공개 com.google.protobuf.ByteString getNameBytes () 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

공개 문자열 getOp () 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

공개 com.google.protobuf.ByteString getOpBytes () 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

공공의 getParserForType ()

공개 int getSerializedSize ()

공개 최종 com.google.protobuf.UnknownFieldSet getUnknownFields ()

공개 부울 hasExperimentalDebugInfo () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

공개 int hashCode ()

공개 최종 부울 isInitialized ()

공개 정적 NodeDef.Builder newBuilder ( NodeDef 프로토타입)

공개 정적 NodeDef.Builder newBuilder ()

공개 NodeDef.Builder newBuilderForType ()

공개 정적 NodeDef parseDelimitedFrom (InputStream 입력)

던지기
IO예외

공개 정적 NodeDefparseDelimitedFrom ( InputStream 입력, com.google.protobuf.ExtensionRegistryLite 확장Registry)

던지기
IO예외

공개 정적 NodeDef 구문 분석 (ByteBuffer 데이터)

던지기
잘못된프로토콜버퍼예외

공개 정적 NodeDef 구문 분석 (com.google.protobuf.CodedInputStream 입력, com.google.protobuf.ExtensionRegistryLite 확장 레지스트리)

던지기
IO예외

공개 정적 NodeDef 구문 분석 (ByteBuffer 데이터, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)

던지기
잘못된프로토콜버퍼예외

공개 정적 NodeDef 구문 분석 (com.google.protobuf.CodedInputStream 입력)

던지기
IO예외

공개 정적 NodeDef 구문 분석 (byte[] 데이터, com.google.protobuf.ExtensionRegistryLite 확장 레지스트리)

던지기
잘못된프로토콜버퍼예외

공개 정적 NodeDef 구문 분석 (com.google.protobuf.ByteString 데이터)

던지기
잘못된프로토콜버퍼예외

공개 정적 NodeDef 구문 분석 (InputStream 입력, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)

던지기
IO예외

공개 정적 NodeDef 구문 분석 (com.google.protobuf.ByteString 데이터, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)

던지기
잘못된프로토콜버퍼예외

공개 정적 파서 ()

공개 NodeDef.Builder toBuilder ()

공개 무효 writeTo (com.google.protobuf.CodedOutputStream 출력)

던지기
IO예외