NodeDef.Builder

classe final estática pública NodeDef.Builder

Tipo de protobuf tensorflow.NodeDef

Métodos Públicos

NodeDef.Builder
addAllInput (valores Iterable<String>) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addInput (valor da string) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addInputBytes (valor com.google.protobuf.ByteString) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, valor do objeto)
NodeDef
construir ()
NodeDef
construirPartial ()
NodeDef.Builder
claro ()
NodeDef.Builder
limparAttr ()
NodeDef.Builder
limparDispositivo () 
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
clearExperimentalDebugInfo () 
 This stores debug information associated with the node.
NodeDef.Builder
clearField (campo com.google.protobuf.Descriptors.FieldDescriptor)
NodeDef.Builder
limparInput () 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
limparNome () 
 The name given to this operator.
NodeDef.Builder
clearOneof (com.google.protobuf.Descriptors.OneofDescriptor umof)
NodeDef.Builder
limparOp () 
 The operation name.
NodeDef.Builder
clonar ()
booleano
contémAttr (chave de string) 
 Operation-specific graph-construction-time configuration.
Mapa<String, AttrValue >
getAttr ()
Use getAttrMap() em vez disso.
interno
getAttrCount () 
 Operation-specific graph-construction-time configuration.
Mapa<String, AttrValue >
getAttrMap () 
 Operation-specific graph-construction-time configuration.
Valor de atributo
getAttrOrDefault (chave de string, AttrValue defaultValue) 
 Operation-specific graph-construction-time configuration.
Valor de atributo
getAttrOrThrow (chave de string) 
 Operation-specific graph-construction-time configuration.
NodeDef
getDefaultInstanceForType ()
final estático com.google.protobuf.Descriptors.Descriptor
getDescriptor ()
com.google.protobuf.Descriptors.Descriptor
getDescriptorForType ()
Corda
getDispositivo () 
 A (possibly partial) specification for the device on which this
 node should be placed.
com.google.protobuf.ByteString
getDeviceBytes () 
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.ExperimentalDebugInfo
getExperimentalDebugInfo () 
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfo.Builder
getExperimentalDebugInfoBuilder () 
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfoOrBuilder
getExperimentalDebugInfoOrBuilder () 
 This stores debug information associated with the node.
Corda
getInput (índice interno) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ByteString
getInputBytes (índice interno) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
interno
getInputCount () 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ProtocolStringList
getInputList () 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
Mapa<String, AttrValue >
getMutableAttr ()
Use acessadores de mutação alternativos.
Corda
getNome () 
 The name given to this operator.
com.google.protobuf.ByteString
getNomeBytes () 
 The name given to this operator.
Corda
getOp () 
 The operation name.
com.google.protobuf.ByteString
getOpBytes () 
 The operation name.
booleano
hasExperimentalDebugInfo () 
 This stores debug information associated with the node.
booleano final
éinicializado ()
NodeDef.Builder
mergeExperimentalDebugInfo (valor NodeDef.ExperimentalDebugInfo ) 
 This stores debug information associated with the node.
NodeDef.Builder
mergeFrom (com.google.protobuf.Message outro)
NodeDef.Builder
mergeFrom (entrada com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite extensionRegistry)
final NodeDef.Builder
mesclarUnknownFields (com.google.protobuf.UnknownFieldSet desconhecidoFields)
NodeDef.Builder
putAllAttr (Map<String, AttrValue > valores) 
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
putAttr (chave String, valor AttrValue ) 
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
removeAttr (chave de string) 
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
setDevice (valor da string) 
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
setDeviceBytes (valor com.google.protobuf.ByteString) 
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
setExperimentalDebugInfo ( NodeDef.ExperimentalDebugInfo.Builder construtorForValue) 
 This stores debug information associated with the node.
NodeDef.Builder
setExperimentalDebugInfo (valor NodeDef.ExperimentalDebugInfo ) 
 This stores debug information associated with the node.
NodeDef.Builder
setField (campo com.google.protobuf.Descriptors.FieldDescriptor, valor do objeto)
NodeDef.Builder
setInput (índice int, valor String) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
setName (valor da string) 
 The name given to this operator.
NodeDef.Builder
setNameBytes (valor com.google.protobuf.ByteString) 
 The name given to this operator.
NodeDef.Builder
setOp (valor da string) 
 The operation name.
NodeDef.Builder
setOpBytes (valor com.google.protobuf.ByteString) 
 The operation name.
NodeDef.Builder
setRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, índice int, valor do objeto)
final NodeDef.Builder
setUnknownFields (com.google.protobuf.UnknownFieldSet desconhecidoFields)

Métodos herdados

Métodos Públicos

public NodeDef.Builder addAllInput (valores Iterable<String>) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

público NodeDef.Builder addInput (valor de string) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

público NodeDef.Builder addInputBytes (valor com.google.protobuf.ByteString) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

public NodeDef.Builder addRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, valor do objeto)

compilação NodeDef pública ()

público NodeDef buildPartial ()

público NodeDef.Builder claro ()

público NodeDef.Builder clearAttr ()

público NodeDef.Builder clearDevice () 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

public NodeDef.Builder clearExperimentalDebugInfo () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.Builder clearField (campo com.google.protobuf.Descriptors.FieldDescriptor)

público NodeDef.Builder clearInput () 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

público NodeDef.Builder clearName () 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

público NodeDef.Builder clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)

público NodeDef.Builder clearOp () 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

clone público NodeDef.Builder ()

public boolean containsAttr (chave String) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

mapa público<String, AttrValue > getAttr ()

Use getAttrMap() em vez disso.

público int getAttrCount () 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

mapa público<String, AttrValue > getAttrMap () 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public AttrValue getAttrOrDefault (chave de string, AttrValue defaultValue) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

público AttrValue getAttrOrThrow (chave de string) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

público NodeDef getDefaultInstanceForType ()

final estático público com.google.protobuf.Descriptors.Descriptor getDescriptor ()

público com.google.protobuf.Descriptors.Descriptor getDescriptorForType ()

String pública getDevice () 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

público com.google.protobuf.ByteString getDeviceBytes () 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

public NodeDef.ExperimentalDebugInfo getExperimentalDebugInfo () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.ExperimentalDebugInfo.Builder getExperimentalDebugInfoBuilder () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.ExperimentalDebugInfoOrBuilder getExperimentalDebugInfoOrBuilder () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

string pública getInput (índice int) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

público com.google.protobuf.ByteString getInputBytes (índice int) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

público int getInputCount () 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

público com.google.protobuf.ProtocolStringList getInputList () 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

mapa público<String, AttrValue > getMutableAttr ()

Use acessadores de mutação alternativos.

String pública getNome () 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

público com.google.protobuf.ByteString getNameBytes () 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

String pública getOp () 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

público com.google.protobuf.ByteString getOpBytes () 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

hasExperimentalDebugInfo () booleano público 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

público final booleano isInitialized ()

public NodeDef.Builder mergeExperimentalDebugInfo (valor NodeDef.ExperimentalDebugInfo ) 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

público NodeDef.Builder mergeFrom (com.google.protobuf.Message outro)

public NodeDef.Builder mergeFrom (entrada com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite extensionRegistry)

Lança
IOException

público final NodeDef.Builder mergeUnknownFields (com.google.protobuf.UnknownFieldSet desconhecidoFields)

public NodeDef.Builder putAllAttr (Map<String, AttrValue > valores) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public NodeDef.Builder putAttr (chave String, valor AttrValue ) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public NodeDef.Builder removeAttr (chave de string) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

público NodeDef.Builder setDevice (valor de string) 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

público NodeDef.Builder setDeviceBytes (valor com.google.protobuf.ByteString) 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

public NodeDef.Builder setExperimentalDebugInfo ( NodeDef.ExperimentalDebugInfo.Builder builderForValue) 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.Builder setExperimentalDebugInfo (valor NodeDef.ExperimentalDebugInfo ) 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.Builder setField (campo com.google.protobuf.Descriptors.FieldDescriptor, valor do objeto)

public NodeDef.Builder setInput (índice int, valor String) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

público NodeDef.Builder setName (valor da string) 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

público NodeDef.Builder setNameBytes (valor com.google.protobuf.ByteString) 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

público NodeDef.Builder setOp (valor da string) 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

público NodeDef.Builder setOpBytes (valor com.google.protobuf.ByteString) 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

public NodeDef.Builder setRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, índice int, valor do objeto)

final público NodeDef.Builder setUnknownFields (com.google.protobuf.UnknownFieldSet desconhecidoFields)