NodeDef.Builder

publiczna statyczna klasa końcowa NodeDef.Builder

Protobuf typu tensorflow.NodeDef

Metody publiczne

Konstruktor NodeDef
addAllInput (wartości Iterable<String>) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
Konstruktor NodeDef
addInput (wartość ciągu) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
Konstruktor NodeDef
addInputBytes (wartość com.google.protobuf.ByteString) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
Konstruktor NodeDef
addRepeatedField (pole com.google.protobuf.Descriptors.FieldDescriptor, wartość obiektu)
Wartość węzła
zbudować ()
Wartość węzła
kompilacjaCzęściowa ()
Konstruktor NodeDef
jasne ()
Konstruktor NodeDef
wyczyśćAttr ()
Konstruktor NodeDef
wyczyść urządzenie () 
 A (possibly partial) specification for the device on which this
 node should be placed.
Konstruktor NodeDef
clearExperimentalDebugInfo () 
 This stores debug information associated with the node.
Konstruktor NodeDef
clearField (pole com.google.protobuf.Descriptors.FieldDescriptor)
Konstruktor NodeDef
wyczyść wejście () 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
Konstruktor NodeDef
wyczyśćNazwa () 
 The name given to this operator.
Konstruktor NodeDef
clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)
Konstruktor NodeDef
wyczyśćOp () 
 The operation name.
Konstruktor NodeDef
klon ()
wartość logiczna
zawieraAttr (klucz ciągu) 
 Operation-specific graph-construction-time configuration.
Mapa<String, AttrValue >
pobierzAttr ()
Zamiast tego użyj getAttrMap() .
wew
getAttrCount () 
 Operation-specific graph-construction-time configuration.
Mapa<String, AttrValue >
getAttrMap () 
 Operation-specific graph-construction-time configuration.
Wartość atr
getAttrOrDefault (klucz ciągu, wartość domyślna AttrValue ) 
 Operation-specific graph-construction-time configuration.
Wartość atr
getAttrOrThrow (klawisz ciągu) 
 Operation-specific graph-construction-time configuration.
Wartość węzła
getDefaultInstanceForType ()
końcowy statyczny com.google.protobuf.Descriptors.Descriptor
pobierzDescriptor ()
com.google.protobuf.Descriptors.Descriptor
getDescriptorForType ()
Smyczkowy
pobierz urządzenie () 
 A (possibly partial) specification for the device on which this
 node should be placed.
com.google.protobuf.ByteString
getDeviceBytes () 
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.ExperimentalDebugInfo
getExperimentalDebugInfo () 
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfo.Builder
getExperimentalDebugInfoBuilder () 
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfoOrBuilder
getExperimentalDebugInfoOrBuilder () 
 This stores debug information associated with the node.
Smyczkowy
getInput (indeks int) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ByteString
getInputBytes (indeks int) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
wew
pobierz liczbę wejść () 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ProtocolStringList
pobierz listę wejść () 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
Mapa<String, AttrValue >
getMutableAttr ()
Zamiast tego użyj alternatywnych akcesorów mutacji.
Smyczkowy
pobierz nazwę () 
 The name given to this operator.
com.google.protobuf.ByteString
getNameBytes () 
 The name given to this operator.
Smyczkowy
getOp () 
 The operation name.
com.google.protobuf.ByteString
getOpBytes () 
 The operation name.
wartość logiczna
maExperimentalDebugInfo () 
 This stores debug information associated with the node.
końcowa wartość logiczna
jest zainicjowany ()
Konstruktor NodeDef
mergeExperimentalDebugInfo (wartość NodeDef.ExperimentalDebugInfo ) 
 This stores debug information associated with the node.
Konstruktor NodeDef
mergeFrom (com.google.protobuf.Wiadomość inna)
Konstruktor NodeDef
mergeFrom (wejście com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite ExtensionRegistry)
końcowy NodeDef.Builder
mergeUnknownFields (com.google.protobuf.UnknownFieldUstaw nieznane pola)
Konstruktor NodeDef
putAllAttr (Map<String, AttrValue > wartości) 
 Operation-specific graph-construction-time configuration.
Konstruktor NodeDef
putAttr (klucz ciągu, wartość AttrValue ) 
 Operation-specific graph-construction-time configuration.
Konstruktor NodeDef
usuńAttr (klawisz ciągu) 
 Operation-specific graph-construction-time configuration.
Konstruktor NodeDef
setDevice (wartość ciągu) 
 A (possibly partial) specification for the device on which this
 node should be placed.
Konstruktor NodeDef
setDeviceBytes (wartość com.google.protobuf.ByteString) 
 A (possibly partial) specification for the device on which this
 node should be placed.
Konstruktor NodeDef
setExperimentalDebugInfo ( NodeDef.ExperimentalDebugInfo.Builder builderForValue) 
 This stores debug information associated with the node.
Konstruktor NodeDef
setExperimentalDebugInfo (wartość NodeDef.ExperimentalDebugInfo ) 
 This stores debug information associated with the node.
Konstruktor NodeDef
setField (pole com.google.protobuf.Descriptors.FieldDescriptor, wartość obiektu)
Konstruktor NodeDef
setInput (indeks int, wartość ciągu) 
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
Konstruktor NodeDef
setName (wartość ciągu) 
 The name given to this operator.
Konstruktor NodeDef
setNameBytes (wartość com.google.protobuf.ByteString) 
 The name given to this operator.
Konstruktor NodeDef
setOp (wartość ciągu) 
 The operation name.
Konstruktor NodeDef
setOpBytes (wartość com.google.protobuf.ByteString) 
 The operation name.
Konstruktor NodeDef
setRepeatedField (pole com.google.protobuf.Descriptors.FieldDescriptor, indeks int, wartość obiektu)
końcowy NodeDef.Builder
setUnknownFields (com.google.protobuf.UnknownFieldUstaw nieznane pola)

Metody dziedziczone

Metody publiczne

public NodeDef.Builder addAllInput (wartości Iterable<String>) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

public NodeDef.Builder addInput (wartość ciągu) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

public NodeDef.Builder addInputBytes (wartość com.google.protobuf.ByteString) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

public NodeDef.Builder addRepeatedField (pole com.google.protobuf.Descriptors.FieldDescriptor, wartość obiektu)

publiczna kompilacja NodeDef ()

publiczna kompilacja NodeDefCzęściowa ()

publiczny NodeDef.Builder wyczyść ()

publiczny NodeDef.Builder clearAttr ()

publiczny NodeDef.Builder clearDevice () 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

public NodeDef.Builder clearExperimentalDebugInfo () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

publiczny NodeDef.Builder clearField (pole com.google.protobuf.Descriptors.FieldDescriptor)

publiczny NodeDef.Builder clearInput () 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

publiczny NodeDef.Builder clearName () 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

publiczny NodeDef.Builder clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)

publiczny NodeDef.Builder clearOp () 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

publiczny klon NodeDef.Builder ()

publiczna wartość logiczna zawieraAttr (klucz ciągu) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public Map<String, AttrValue > getAttr ()

Zamiast tego użyj getAttrMap() .

publiczny int getAttrCount () 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public Map<String, AttrValue > getAttrMap () 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public AttrValue getAttrOrDefault (klucz ciągu, wartość domyślna AttrValue ) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public AttrValue getAttrOrThrow (klucz ciąg) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

publiczny NodeDef getDefaultInstanceForType ()

public static final com.google.protobuf.Descriptors.Descriptor getDescriptor ()

public com.google.protobuf.Descriptors.Descriptor getDescriptorForType ()

publiczny ciąg getDevice () 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

public com.google.protobuf.ByteString getDeviceBytes () 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

publiczny NodeDef.ExperimentalDebugInfo getExperimentalDebugInfo () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

publiczny NodeDef.ExperimentalDebugInfo.Builder getExperimentalDebugInfoBuilder () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.ExperimentalDebugInfoOrBuilder getExperimentalDebugInfoOrBuilder () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public String getInput (indeks int) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

public com.google.protobuf.ByteString getInputBytes (indeks int) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

publiczny int getInputCount () 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

public com.google.protobuf.ProtocolStringList getInputList () 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

public Map<String, AttrValue > getMutableAttr ()

Zamiast tego użyj alternatywnych akcesorów mutacji.

public String getName () 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

public com.google.protobuf.ByteString getNameBytes () 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

publiczny ciąg getOp () 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

publiczny com.google.protobuf.ByteString getOpBytes () 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

publiczna wartość logiczna maExperimentalDebugInfo () 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

publiczna końcowa wartość logiczna isInitialized ()

publiczne połączenie NodeDef.BuilderExperimentalDebugInfo (wartość NodeDef.ExperimentalDebugInfo ) 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

publiczne połączenie NodeDef.BuilderFrom (com.google.protobuf.Message other)

publiczne połączenie NodeDef.BuilderFrom (wejście com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite rozszerzenieRegistry)

Rzuca
Wyjątek IO

publiczne ostateczne połączenie NodeDef.BuilderUnknownFields (com.google.protobuf.UnknownFieldSetknownFields)

public NodeDef.Builder putAllAttr (Map<String, AttrValue > wartości) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

publiczny NodeDef.Builder putAttr (klucz ciągu, wartość AttrValue ) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public NodeDef.Builder usuńAttr (klucz ciąg) 

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
map<string, .tensorflow.AttrValue> attr = 5;

public NodeDef.Builder setDevice (wartość ciągu) 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

public NodeDef.Builder setDeviceBytes (wartość com.google.protobuf.ByteString) 

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
string device = 4;

publiczny zestaw NodeDef.BuilderExperimentalDebugInfo ( NodeDef.ExperimentalDebugInfo.Builder builderForValue) 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

publiczny zestaw NodeDef.BuilderExperimentalDebugInfo (wartość NodeDef.ExperimentalDebugInfo ) 

 This stores debug information associated with the node.
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.Builder setField (pole com.google.protobuf.Descriptors.FieldDescriptor, wartość obiektu)

public NodeDef.Builder setInput (indeks, wartość ciągu) 

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
repeated string input = 3;

public NodeDef.Builder setName (wartość ciągu) 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

public NodeDef.Builder setNameBytes (wartość com.google.protobuf.ByteString) 

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
string name = 1;

public NodeDef.Builder setOp (wartość ciągu) 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

public NodeDef.Builder setOpBytes (wartość com.google.protobuf.ByteString) 

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
string op = 2;

public NodeDef.Builder setRepeatedField (pole com.google.protobuf.Descriptors.FieldDescriptor, indeks int, wartość obiektu)

publiczny końcowy zestaw NodeDef.BuilderUnknownFields (com.google.protobuf.UnknownFieldSet nieznanyFields)