NodeDef.Builder

NodeDef.Builder คลาสสุดท้ายแบบคงที่สาธารณะ

Protobuf ประเภท tensorflow.NodeDef

วิธีการสาธารณะ

NodeDef.Builder
addAllInput (ค่า Iterable<String>)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addInput (ค่าสตริง)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addInputBytes (ค่า com.google.protobuf.ByteString)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addRepeatedField (com.google.protobuf.Descriptors.FieldDescriptor ช่อง ค่าอ็อบเจ็กต์)
โหนดDef
โหนดDef
NodeDef.Builder
NodeDef.Builder
NodeDef.Builder
ล้างอุปกรณ์ ()
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
ล้างข้อมูลทดลอง DebugInfo ()
 This stores debug information associated with the node.
NodeDef.Builder
clearField (ฟิลด์ com.google.protobuf.Descriptors.FieldDescriptor)
NodeDef.Builder
เคลียร์อินพุต ()
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
ชื่อที่ชัดเจน ()
 The name given to this operator.
NodeDef.Builder
clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)
NodeDef.Builder
ชัดเจน ()
 The operation name.
NodeDef.Builder
บูลีน
containsAttr (คีย์สตริง)
 Operation-specific graph-construction-time configuration.
แมป <สตริง, AttrValue >
getAttr ()
ใช้ getAttrMap() แทน
ภายใน
getAttrCount ()
 Operation-specific graph-construction-time configuration.
แมป <สตริง, AttrValue >
getAttrMap ()
 Operation-specific graph-construction-time configuration.
AttrValue
getAttrOrDefault (คีย์สตริง AttrValue defaultValue)
 Operation-specific graph-construction-time configuration.
AttrValue
getAttrOrThrow (คีย์สตริง)
 Operation-specific graph-construction-time configuration.
โหนดDef
com.google.protobuf.Descriptors.Descriptor แบบคงที่ขั้นสุดท้าย
com.google.protobuf.Descriptors.Descriptor
สตริง
รับอุปกรณ์ ()
 A (possibly partial) specification for the device on which this
 node should be placed.
com.google.protobuf.ByteString
รับอุปกรณ์ไบต์ ()
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.ExperimentalDebugInfo
รับข้อมูลทดลอง DebugInfo ()
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfo.Builder
getExperimentalDebugInfoBuilder ()
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfoOrBuilder
รับ ExperimentalDebugInfoOrBuilder ()
 This stores debug information associated with the node.
สตริง
getInput (ดัชนี int)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ByteString
getInputBytes (ดัชนี int)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
ภายใน
getInputCount ()
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ProtocolStringList
รับInputList ()
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
แมป<สตริง, AttrValue >
getMutableAttr ()
ใช้ตัวเข้าถึงการกลายพันธุ์สำรองแทน
สตริง
รับชื่อ ()
 The name given to this operator.
com.google.protobuf.ByteString
getNameBytes ()
 The name given to this operator.
สตริง
รับOp ()
 The operation name.
com.google.protobuf.ByteString
getOpBytes ()
 The operation name.
บูลีน
hasExperimentalDebugInfo ()
 This stores debug information associated with the node.
บูลีนสุดท้าย
NodeDef.Builder
ผสานExperimentalDebugInfo (ค่า NodeDef.ExperimentalDebugInfo )
 This stores debug information associated with the node.
NodeDef.Builder
mergeFrom (com.google.protobuf.ข้อความ อื่น ๆ )
NodeDef.Builder
mergeFrom (com.google.protobuf.CodedInputStream อินพุต com.google.protobuf.ExtensionRegistryLite extensionRegistry)
NodeDef.Builder สุดท้าย
mergeUnknownFields (com.google.protobuf.UnknownFieldSetknownFields)
NodeDef.Builder
putAllAttr (แมป<สตริง, AttrValue > ค่า)
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
putAttr (คีย์สตริง, ค่า AttrValue )
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
RemoveAttr (คีย์สตริง)
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
setDevice (ค่าสตริง)
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
setDeviceBytes (ค่า com.google.protobuf.ByteString)
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
setExperimentalDebugInfo ( NodeDef.ExperimentalDebugInfo.Builder builderForValue)
 This stores debug information associated with the node.
NodeDef.Builder
setExperimentalDebugInfo (ค่า NodeDef.ExperimentalDebugInfo )
 This stores debug information associated with the node.
NodeDef.Builder
setField (ฟิลด์ com.google.protobuf.Descriptors.FieldDescriptor ค่าอ็อบเจ็กต์)
NodeDef.Builder
setInput (ดัชนี int, ค่าสตริง)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
setName (ค่าสตริง)
 The name given to this operator.
NodeDef.Builder
setNameBytes (ค่า com.google.protobuf.ByteString)
 The name given to this operator.
NodeDef.Builder
setOp (ค่าสตริง)
 The operation name.
NodeDef.Builder
setOpBytes (ค่า com.google.protobuf.ByteString)
 The operation name.
NodeDef.Builder
setRepeatedField (ฟิลด์ com.google.protobuf.Descriptors.FieldDescriptor, ดัชนี int, ค่าอ็อบเจ็กต์)
NodeDef.Builder สุดท้าย
setUnknownFields (com.google.protobuf.UnknownFieldSetknownFields)

วิธีการสืบทอด

วิธีการสาธารณะ

NodeDef.Builder สาธารณะ addAllInput (ค่า Iterable <String>)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

NodeDef.Builder addInput สาธารณะ (ค่าสตริง)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

NodeDef.Builder สาธารณะ addInputBytes (ค่า com.google.protobuf.ByteString)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

NodeDef.Builder สาธารณะ addRepeatedField (ฟิลด์ com.google.protobuf.Descriptors.FieldDescriptor ค่าอ็อบเจ็กต์)

การสร้าง NodeDef สาธารณะ ()

NodeDef buildPartial สาธารณะ ()

NodeDef.Builder สาธารณะ ชัดเจน ()

NodeDef.Builder สาธารณะ clearAttr ()

NodeDef.Builder สาธารณะ clearDevice ()

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

NodeDef.Builder สาธารณะ clearExperimentalDebugInfo ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

NodeDef.Builder clearField สาธารณะ (ฟิลด์ com.google.protobuf.Descriptors.FieldDescriptor)

NodeDef.Builder สาธารณะ clearInput ()

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

NodeDef.Builder สาธารณะ clearName ()

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

NodeDef.Builder สาธารณะ clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)

NodeDef.Builder สาธารณะ clearOp ()

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

โคลน NodeDef.Builder สาธารณะ ()

บูลีนสาธารณะ containsAttr (คีย์สตริง)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

แผนที่สาธารณะ <String, AttrValue > getAttr ()

ใช้ getAttrMap() แทน

สาธารณะ int getAttrCount ()

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

แผนที่สาธารณะ <String, AttrValue > getAttrMap ()

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

AttrValue getAttrOrDefault สาธารณะ (คีย์สตริง, AttrValue defaultValue)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

AttrValue สาธารณะ getAttrOrThrow (คีย์สตริง)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

NodeDef สาธารณะ getDefaultInstanceForType ()

สาธารณะคงที่สุดท้าย com.google.protobuf.Descriptors.Descriptor getDescriptor ()

สาธารณะ com.google.protobuf.Descriptors.Descriptor getDescriptorForType ()

สตริงสาธารณะ getDevice ()

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

สาธารณะ com.google.protobuf.ByteString getDeviceBytes ()

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

NodeDef.ExperimentalDebugInfo สาธารณะ getExperimentalDebugInfo ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

NodeDef.ExperimentalDebugInfo.Builder สาธารณะ getExperimentalDebugInfoBuilder ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

NodeDef.ExperimentalDebugInfoOrBuilder สาธารณะ รับ ExperimentalDebugInfoOrBuilder ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

สตริงสาธารณะ getInput (ดัชนี int)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

สาธารณะ com.google.protobuf.ByteString getInputBytes (ดัชนี int)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

สาธารณะ int getInputCount ()

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

สาธารณะ com.google.protobuf.ProtocolStringList getInputList ()

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

แผนที่สาธารณะ <String, AttrValue > getMutableAttr ()

ใช้ตัวเข้าถึงการกลายพันธุ์สำรองแทน

สตริงสาธารณะ getName ()

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

สาธารณะ com.google.protobuf.ByteString getNameBytes ()

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

สตริงสาธารณะ getOp ()

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

สาธารณะ com.google.protobuf.ByteString getOpBytes ()

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

บูลีนสาธารณะ hasExperimentalDebugInfo ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

บูลีนสุดท้ายสาธารณะ isInitialized ()

NodeDef.Builder สาธารณะ ผสาน ExperimentalDebugInfo (ค่า NodeDef.ExperimentalDebugInfo )

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

NodeDef.Builder สาธารณะ ผสานจาก (com.google.protobuf.Message อื่น ๆ )

NodeDef.Builder สาธารณะ ผสานจาก (com.google.protobuf.CodedInputStream อินพุต com.google.protobuf.ExtensionRegistryLite extensionRegistry)

ขว้าง
IOข้อยกเว้น

NodeDef.Builder สุดท้ายสาธารณะ ผสาน UnknownFields (com.google.protobuf.UnknownFieldSetknownFields)

NodeDef.Builder สาธารณะ putAllAttr (แมป <สตริง, AttrValue > ค่า)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

NodeDef.Builder สาธารณะ putAttr (คีย์สตริง, ค่า AttrValue )

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

NodeDef.Builder สาธารณะ RemoveAttr (คีย์สตริง)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

NodeDef.Builder setDevice สาธารณะ (ค่าสตริง)

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

NodeDef.Builder สาธารณะ setDeviceBytes (ค่า com.google.protobuf.ByteString)

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

NodeDef.Builder สาธารณะ setExperimentalDebugInfo ( NodeDef.ExperimentalDebugInfo.Builder builderForValue)

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

NodeDef.Builder สาธารณะ setExperimentalDebugInfo (ค่า NodeDef.ExperimentalDebugInfo )

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

สาธารณะ NodeDef.Builder setField (ฟิลด์ com.google.protobuf.Descriptors.FieldDescriptor ค่าอ็อบเจ็กต์)

NodeDef.Builder สาธารณะ setInput (ดัชนี int, ค่าสตริง)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

NodeDef.Builder setName สาธารณะ (ค่าสตริง)

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

NodeDef.Builder setNameBytes สาธารณะ (ค่า com.google.protobuf.ByteString)

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

NodeDef.Builder setOp สาธารณะ (ค่าสตริง)

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

NodeDef.Builder สาธารณะ setOpBytes (ค่า com.google.protobuf.ByteString)

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

NodeDef.Builder สาธารณะ setRepeatedField (ฟิลด์ com.google.protobuf.Descriptors.FieldDescriptor, ดัชนี int, ค่าอ็อบเจ็กต์)

NodeDef.Builder สุดท้ายสาธารณะ setUnknownFields (com.google.protobuf.UnknownFieldSetknownFields)