NodeDef.Builder

classe finale statica pubblica NodeDef.Builder

Tipo di protocollo tensorflow.NodeDef

Metodi pubblici

NodeDef.Builder
addAllInput (valori Iterable<String>)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addInput (valore stringa)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addInputBytes (valore com.google.protobuf.ByteString)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
addRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, valore oggetto)
NodoDef
NodoDef
NodeDef.Builder
chiaro ()
NodeDef.Builder
NodeDef.Builder
clearDevice ()
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
clearExperimentalDebugInfo ()
 This stores debug information associated with the node.
NodeDef.Builder
clearField (campo com.google.protobuf.Descriptors.FieldDescriptor)
NodeDef.Builder
chiaroInput ()
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
nomechiaro ()
 The name given to this operator.
NodeDef.Builder
clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)
NodeDef.Builder
clearOp ()
 The operation name.
NodeDef.Builder
clone ()
booleano
contieneAttr (chiave String)
 Operation-specific graph-construction-time configuration.
Mappa<String, AttrValue >
getAttr ()
Utilizzare invece getAttrMap() .
int
getAttrCount ()
 Operation-specific graph-construction-time configuration.
Mappa<String, AttrValue >
getAttrMap ()
 Operation-specific graph-construction-time configuration.
AttrValue
getAttrOrDefault (chiave String, AttrValue defaultValue)
 Operation-specific graph-construction-time configuration.
AttrValue
getAttrOrThrow (chiave String)
 Operation-specific graph-construction-time configuration.
NodoDef
com.google.protobuf.Descriptors.Descriptor statico finale
com.google.protobuf.Descriptors.Descriptor
Corda
getDevice ()
 A (possibly partial) specification for the device on which this
 node should be placed.
com.google.protobuf.ByteString
getDeviceBytes ()
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.ExperimentalDebugInfo
getExperimentalDebugInfo ()
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfo.Builder
getExperimentalDebugInfoBuilder ()
 This stores debug information associated with the node.
NodeDef.ExperimentalDebugInfoOrBuilder
getExperimentalDebugInfoOrBuilder ()
 This stores debug information associated with the node.
Corda
getInput (indice int)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ByteString
getInputBytes (indice int)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
int
getInputCount ()
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
com.google.protobuf.ProtocolStringList
getInputList ()
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
Mappa<String, AttrValue >
getMutableAttr ()
Utilizzare invece accessori di mutazione alternativi.
Corda
getNome ()
 The name given to this operator.
com.google.protobuf.ByteString
getNomeBytes ()
 The name given to this operator.
Corda
getOp ()
 The operation name.
com.google.protobuf.ByteString
getOpBytes ()
 The operation name.
booleano
hasExperimentalDebugInfo ()
 This stores debug information associated with the node.
booleano finale
NodeDef.Builder
mergeExperimentalDebugInfo (valore NodeDef.ExperimentalDebugInfo )
 This stores debug information associated with the node.
NodeDef.Builder
mergeFrom (com.google.protobuf.Message altro)
NodeDef.Builder
mergeFrom (input com.google.protobuf.CodedInputStream, estensione com.google.protobuf.ExtensionRegistryLiteRegistry)
finale NodeDef.Builder
mergeUnknownFields (com.google.protobuf.UnknownFieldSet UnknownFields)
NodeDef.Builder
putAllAttr (Map<String, AttrValue > valori)
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
putAttr (chiave String, valore AttrValue )
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
rimuoviAttr (chiave String)
 Operation-specific graph-construction-time configuration.
NodeDef.Builder
setDevice (valore stringa)
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
setDeviceBytes (valore com.google.protobuf.ByteString)
 A (possibly partial) specification for the device on which this
 node should be placed.
NodeDef.Builder
setExperimentalDebugInfo ( NodeDef.ExperimentalDebugInfo.Builder builderForValue)
 This stores debug information associated with the node.
NodeDef.Builder
setExperimentalDebugInfo (valore NodeDef.ExperimentalDebugInfo )
 This stores debug information associated with the node.
NodeDef.Builder
setField (campo com.google.protobuf.Descriptors.FieldDescriptor, valore oggetto)
NodeDef.Builder
setInput (indice int, valore stringa)
 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node".
NodeDef.Builder
setName (valore stringa)
 The name given to this operator.
NodeDef.Builder
setNameBytes (valore com.google.protobuf.ByteString)
 The name given to this operator.
NodeDef.Builder
setOp (valore stringa)
 The operation name.
NodeDef.Builder
setOpBytes (valore com.google.protobuf.ByteString)
 The operation name.
NodeDef.Builder
setRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, indice int, valore oggetto)
finale NodeDef.Builder
setUnknownFields (com.google.protobuf.UnknownFieldSet UnknownFields)

Metodi ereditati

Metodi pubblici

public NodeDef.Builder addAllInput (valori Iterable<String>)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

public NodeDef.Builder addInput (valore stringa)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

pubblico NodeDef.Builder addInputBytes (valore com.google.protobuf.ByteString)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

public NodeDef.Builder addRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, valore oggetto)

build pubblica di NodeDef ()

public NodeDef buildPartial ()

pubblico NodeDef.Builder chiaro ()

public NodeDef.Builder clearAttr ()

public NodeDef.Builder clearDevice ()

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

public NodeDef.Builder clearExperimentalDebugInfo ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.Builder clearField (campo com.google.protobuf.Descriptors.FieldDescriptor)

public NodeDef.Builder clearInput ()

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

public NodeDef.Builder clearName ()

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

public NodeDef.Builder clearOneof (com.google.protobuf.Descriptors.OneofDescriptor oneof)

public NodeDef.Builder clearOp ()

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

clone pubblico di NodeDef.Builder ()

booleano pubblico contieneAttr (chiave String)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

mappa pubblica<String, AttrValue > getAttr ()

Utilizzare invece getAttrMap() .

public int getAttrCount ()

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

mappa pubblica<String, AttrValue > getAttrMap ()

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

public AttrValue getAttrOrDefault (chiave String, AttrValue defaultValue)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

public AttrValue getAttrOrThrow (chiave String)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

pubblico NodeDef getDefaultInstanceForType ()

public static final com.google.protobuf.Descriptors.Descriptor getDescriptor ()

pubblico com.google.protobuf.Descriptors.Descriptor getDescriptorForType ()

stringa pubblica getDevice ()

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

pubblico com.google.protobuf.ByteString getDeviceBytes ()

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

public NodeDef.ExperimentalDebugInfo getExperimentalDebugInfo ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.ExperimentalDebugInfo.Builder getExperimentalDebugInfoBuilder ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.ExperimentalDebugInfoOrBuilder getExperimentalDebugInfoOrBuilder ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public String getInput (indice int)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

pubblico com.google.protobuf.ByteString getInputBytes (indice int)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

public int getInputCount ()

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

pubblico com.google.protobuf.ProtocolStringList getInputList ()

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

mappa pubblica<String, AttrValue > getMutableAttr ()

Utilizzare invece accessori di mutazione alternativi.

stringa pubblica getName ()

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

pubblico com.google.protobuf.ByteString getNameBytes ()

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

stringa pubblica getOp ()

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

pubblico com.google.protobuf.ByteString getOpBytes ()

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

pubblico booleano hasExperimentalDebugInfo ()

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public final booleano isInitialized ()

public NodeDef.Builder mergeExperimentalDebugInfo (valore NodeDef.ExperimentalDebugInfo )

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.Builder mergeFrom (com.google.protobuf.Message altro)

public NodeDef.Builder mergeFrom (input com.google.protobuf.CodedInputStream, com.google.protobuf.ExtensionRegistryLite extensionRegistry)

Lancia
IOException

public final NodeDef.Builder mergeUnknownFields (com.google.protobuf.UnknownFieldSetknownFields)

public NodeDef.Builder putAllAttr (Map<String, AttrValue > valori)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

public NodeDef.Builder putAttr (chiave String, valore AttrValue )

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

public NodeDef.BuilderremoveAttr ( chiave String)

 Operation-specific graph-construction-time configuration.
 Note that this should include all attrs defined in the
 corresponding OpDef, including those with a value matching
 the default -- this allows the default to change and makes
 NodeDefs easier to interpret on their own.  However, if
 an attr with a default is not specified in this list, the
 default will be used.
 The "names" (keys) must match the regexp "[a-z][a-z0-9_]+" (and
 one of the names from the corresponding OpDef's attr field).
 The values must have a type matching the corresponding OpDef
 attr's type field.
 TODO(josh11b): Add some examples here showing best practices.
 
map<string, .tensorflow.AttrValue> attr = 5;

public NodeDef.Builder setDevice (valore stringa)

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

public NodeDef.Builder setDeviceBytes (valore com.google.protobuf.ByteString)

 A (possibly partial) specification for the device on which this
 node should be placed.
 The expected syntax for this string is as follows:
 DEVICE_SPEC ::= PARTIAL_SPEC
 PARTIAL_SPEC ::= ("/" CONSTRAINT) *
 CONSTRAINT ::= ("job:" JOB_NAME)
              | ("replica:" [1-9][0-9]*)
              | ("task:" [1-9][0-9]*)
              | ("device:" [A-Za-z]* ":" ([1-9][0-9]* | "*") )
 Valid values for this string include:
 * "/job:worker/replica:0/task:1/device:GPU:3"  (full specification)
 * "/job:worker/device:GPU:3"                   (partial specification)
 * ""                                    (no specification)
 If the constraints do not resolve to a single device (or if this
 field is empty or not present), the runtime will attempt to
 choose a device automatically.
 
string device = 4;

public NodeDef.Builder setExperimentalDebugInfo ( NodeDef.ExperimentalDebugInfo.Builder builderForValue)

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.Builder setExperimentalDebugInfo (valore NodeDef.ExperimentalDebugInfo )

 This stores debug information associated with the node.
 
.tensorflow.NodeDef.ExperimentalDebugInfo experimental_debug_info = 6;

public NodeDef.Builder setField (campo com.google.protobuf.Descriptors.FieldDescriptor, valore oggetto)

public NodeDef.Builder setInput (indice int, valore stringa)

 Each input is "node:src_output" with "node" being a string name and
 "src_output" indicating which output tensor to use from "node". If
 "src_output" is 0 the ":0" suffix can be omitted.  Regular inputs
 may optionally be followed by control inputs that have the format
 "^node".
 
repeated string input = 3;

public NodeDef.Builder setName (valore stringa)

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

public NodeDef.Builder setNameBytes (valore com.google.protobuf.ByteString)

 The name given to this operator. Used for naming inputs,
 logging, visualization, etc.  Unique within a single GraphDef.
 Must match the regexp "[A-Za-z0-9.][A-Za-z0-9_>./]*".
 
string name = 1;

public NodeDef.Builder setOp (valore stringa)

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

pubblico NodeDef.Builder setOpBytes (valore com.google.protobuf.ByteString)

 The operation name.  There may be custom parameters in attrs.
 Op names starting with an underscore are reserved for internal use.
 
string op = 2;

public NodeDef.Builder setRepeatedField (campo com.google.protobuf.Descriptors.FieldDescriptor, indice int, valore oggetto)

public final NodeDef.Builder setUnknownFields (com.google.protobuf.UnknownFieldSetknownFields)